Galileo - VSAT Installation Training
CHAPTER 3
Hardware Installation
MAKING COAX CABLES - Page 2
of 2
End of Section
Go back to Chapters
Place the coax connector into the connector crimper. Make sure the crimper handles are opened.
Insert the copper center of the coax into the barrel inside of the crimper. Slide the connector toward the barrel.
Push on the coax and connector to that it snaps into the crimper.
The connector is now ready to be crimped.
Grip the handles and crimp the fitting tightly.
Note how the blue fitting is now inside of the connector.
The finished connector.
