CHALLENGE 1 – Connectivity for remote sites
The solution – RockBLOCK Plus
Renewable energy generation sites for hydro, wind and solar farms can often be in remote and even hostile locations. With terrestrial networks only covering 15% of the Earth’s surface (or 50% of the available landmass), and focused on highly populated and urban areas, renewables sites are often out of reach of cellular and fiber connectivity.
There are numerous challenges in providing data backhaul from such remote sites, whether they’re in the development or deployment stages. Unconnected sites are siloed and leave operators unable to reach their assets unless deploying a lone worker to site – with the safety, time delays and additional costs all key considerations.
Ground Control has deployed full end-to-end solutions for renewable providers to retrieve their data from the field in over 100 countries, recommending the best solution for their operational needs. For remote site data retrieval, the RockBLOCK Plus is rugged and waterproof – ideal for remote and exposed sites – and is designed specifically to transmit sensor data from IoT applications. RockBLOCK Plus sends and receives short messages from anywhere on Earth with a view of the sky, via Iridium SBD, as frequently as every 10 seconds, making the device ideal for remote performance monitoring and pre-empting maintenance requirements.
CHALLENGE 2 – Combining remote renewables sites’ data
The solution – Cloudloop
To enable renewable energy providers to balance supply and demand on the power grid, they must determine how much renewable energy is being generated at any given time. This can be challenging to achieve without the use of satellite communication due to the size, scale and remote locations of renewable energy resources.
Cloudloop is Ground Control’s cloud-based software platform for subscription and device management. The software enables renewable providers to combine multiple and widely distributed sensor data into a singular entity to provide a complete visualization of their energy-generating operations.
All satellite device activations and deactivations, airtime management and troubleshooting can be achieved remotely via the Cloudloop platform. Monitoring in real-time, historical data usage and alerts enable proactive cost management, with diagnostics reporting significantly reducing field maintenance costs, regardless of the scale or distribution of the data loggers.
CHALLENGE 3 – Security and cybercrime
The solution – SCADASat
As the Colonial Pipeline hack proved, the renewables industry is at risk of cyber attacks. But a key data transfer requirement exists between on-site RTUs and SCADA systems to extract mission-critical sensor data, however remote, to prevent and mitigate outages and disruption to energy supply.
Some satellite networks have the advantage of not needing any publicly-accessible terrestrial infrastructure in order to extract data from RTUs. So if wind farms, reservoirs or solar sites don’t receive reliable cellular coverage, satellite is the best option, either as primary or failover. For maximum data security, the SCADASat solution from Ground Control is a narrowband private satellite network that avoids utilizing the internet and is the optimally secure solution for remote monitoring, controlling, and surveillance of renewable energy grids.
SCADASat enables renewable providers to cost-effectively and reliably transmit remote SCADA, telemetry and M2M data – all in a secure network. The platform is highly scalable with low operating costs compared to the new installation and maintenance of fiber connectivity. It is compatible with both IP and legacy serial devices and operates independently from terrestrial communications systems, both complementing and offering an alternative solution to terrestrial networks, ensuring transmission at all times.
CHALLENGE 4 – Energy wastage
The solution – RockREMOTE Rugged
Wind farms are a good example of where the power generated could become surplus and potentially wasted. Windfarms are typically located on expansive areas of remote land or lie miles offshore and thus, make it challenging for control stations to be installed onsite.
The nature of these remote and expansive sites presents a challenge for renewable energy providers. They must be efficiently managed and monitored to ensure maximum energy utilization and minimum energy wastage – which is otherwise costly to energy providers. Cloud-based remote monitoring solutions are therefore essential to help operators monitor multiple wind farm locations at any one time, collecting all, or exceptional data, on wind turbine speed, torque, power, wind speed, wind direction and so on.
RockREMOTE Rugged is a reliable solution for remote IoT challenges. It securely connects remote IoT assets using IP or message-based protocols and provides diverse connectivity through Iridium Satellite or LTE networks. The device is powered by a sophisticated Linux-based operating system that offers containerized hosting for edge-computing applications.
For renewable energy sites, this means complete visibility and control – even if assets are spread over a wide area. The RockREMOTE Rugged solution extends the reach of telemetry applications and enables real-time reporting on power generation to prevent saturation and wastage.
CHALLENGE 5 – Costly data retrieval
The solution – Cobham EXPLORER 540
We know that many renewable energy sites are located in remote areas. Where cellular and fiber connectivity does already exist, this type of connectivity will likely be the most cost-effective option to retrieve backhaul data. However, The Department of Transportation put the average cost of laying new fiber at $27,000 per mile. Further to the costly installation, there’s the ongoing truck roll costs to consider with an experienced Field Engineer costing, on average, $68,132 per year (hardware lifetime is typically around 10 years). Utilizing remote satellite IoT communication and monitoring solutions mitigates this cost almost entirely as the terminals are remotely managed.
As the world’s first BGAN M2M terminal designed to operate on both Inmarsat BGAN (Broadband Global Area Network) and cellular 2G/3G/LTE networks, the Cobham Explorer 540 delivers always-available connectivity for critical monitoring and control applications where cellular and fiber are out of reach.
The BGAN M2M service uses Inmarsat BGAN to provide a reliable, global, two-way IP data service. It is designed to connect monitoring and control applications in remote, unmanned locations, providing visibility and management of those assets. By combining BGAN M2M with cellular connectivity in the same terminal, the Explorer 540 gives users the opportunity to choose the best carrier for any location, or to switch seamlessly between cellular and satellite using lowest cost routing logic.